Cramolin PLASTIK

Clear varnish for insulation, sealing and waterproofing

Transparent varnish for insulation, sealing, and waterproofing

PLASTIK contains high-quality acrylic resin varnish. It covers surfaces with a protective film that is resistant to acids, alkalis, alcohols, moisture, and adverse environmental influences. PLASTIC remains effective in a wide temperature range from -70°C to +120°C. The paint adheres to metal, plastic, wood, cardboard, glass, etc. It does not drip and is solderable. PLASTIK contains a UV indicator for quality control. PLASTIK complies with MIL-I-460580 “Acrylic Resin Type”.

TECHNICAL DATA:
Appearance: transparent
Odor: solvent
Drying time: dust dry after 25 minutes, cured after 48 hours
Density at 20°C: 0.88 g/cm3
Viscosity: 12s (DIN 53211)
Resistance: good against acids and alkalis, very good against light
Temperature resistance: (class E according to VDE 03630) -70°C to +120°C
Dielectric strength: 21 kV/mm
Relative dielectric number: 3.09 (DIN 53483)
Surface resistance: 5 x 1014 Ohm
Conductivity: 1014 Ohm
Coverage: 5 – 8 m2 /400 ml can
2.2. LABELING OF ELEMENTS
Component(s) determining the risk for labeling
n-butyl acetate, acetone, 1-methoxy-2-propanol, monopropylene glycol methyl methyl ether

Signal word: danger

Photographs: GHS02-GHS07

HAZARD STATEMENTS:
H222 Extremely flammable aerosol.
H229 Pressurized container: May burst if heated.
H319 Causes severe eye irritation.
H336 May cause drowsiness or dizziness.
SAFETY INSTRUCTIONS:
P102 Keep out of reach of children.
P501 Contents/containers Dispose of this product and its container in accordance with local waste disposal regulations.
P410+P412 Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P271 Use only outdoors or in well-ventilated areas.
P251 Do not pierce or burn, even after use.
P210 Keep away from heat. No smoking.
Special labeling for certain mixtures
EUH066 Repeated exposure may cause skin dryness or cracking.